What To Look For When Buying Your Pallet Jack

Sharing is caring!

Deciding which pallet jack to purchase can come with many factors to match before making a ultimate decision. At present we will walk by five necessary factors that go into making a profitable pallet jack purchase.

1) Size

You don’t wish to purchase a pallet jack that is the wrong length. Fork size and width refers to how wide or lengthy the forks on the pallet jack are from the outermost part of each side of the jack. The most typical fork measurement is 27×48″ and the most common dimension of wood pallets is forty×48″. For pallets which can be 40″ long you should be utilizing a pallet jack with forks which might be 27″ wide. Whether or not it is simply too short or too long can affect what your pallet jack can or cannot carry. This shouldn’t be the only problem the length of a pallet jack can cause though. Buying a pallet jack that is too lengthy can make for powerful maneuvers all through your warehouse. Being stuck with a pallet jack that takes longer to maneuver because it’s too long can have a big impact on how much worth that pallet jack will actually provide for you.

2) Capacity

It is extremely vital that you just buy a pallet jack that’s outfitted to hold the items that you just transport. Not all pallet jacks have the identical most capacity. Pallet jack capacities can range from wherever between 4,500 lbs. and 5,500 lbs. There are even some heavy-duty models that are outfitted to hold loads that exceed 5,500 lbs. Buying a pallet jack that has a decrease capacity than what you want can cause safety problems from broken pallet jacks as well as equipment downtime and damage to your products.

3) Pallet Jack Weight

One other important attribute of pallet jacks to take into account when buying is the base weight of the unit. While you move a pallet with your pallet jack you aren’t just moving the burden of the pallet, but the weight of the pallet and pallet jack combined. Because of this it’s important to make certain that the combined weight of your pallets and pallet jack might be supported by the surfaces that you just will be carrying your pallet jack over like container floors or vehicle trays. When you purchase a pallet jack that makes your loads to heavy because of their base weight you may damage parts of your warehouse or other equipment when transporting them.

four) Lift Height

The lift height is how high the forks on the pallet jack could be lifted. The usual height is 3″ on the lowest point up to a maximum of seven ¾”. You may as well use low profile models that go lower than the usual height for pallets that sit at decrease heights. While some pallet jacks can lift higher than others it is necessary to make sure that your pallet jack can safely lift the weight of your pallets to the desired heights. Once raised to a sure level pallet jacks can tip if they’re holding too much weight at certain heights.

5) Wheels

The wheels on your pallet jack can serve two essential purposes. The primary function is to provide easy and safe maneuvering throughout your warehouse. Making positive you might have the right wheels in your pallet jack is important to make positive that your pallets are making it from level A to level B easily and safely. The second objective that the wheels serve is to keep the pallet jack from inflicting any damage to the floors of your warehouse. Selecting wheels which might be made of the fallacious materials can cause lasting damage to your warehouse floors. To make sure that your warehouse floors are protected it is recommended that you just select a pallet jack with floor-saving polyurethane wheels. These types of wheels are non-staining and will keep your warehouse floors protected.

If you cherished this article and also you would like to obtain more info regarding powered pallet truck kindly visit our web site.