Wood shelf brackets may also help you make quick work of straightforward shelving projects around the house. Whether or not you might be using L-brackets or installing slots and brackets, the next ideas may also help make working with wooden shelves much easier.
1. Use Heavy Duty Anchors in Drywall
If you will be putting in shelf brackets in drywall, consider utilizing heavy-duty anchors moderately than the cheap plastic ones. Heavy-duty anchors are usually made of steel or aluminum and provide a lot better support for shelving brackets than do the thin plastic anchors which can be commonly sold at residence improvement centers. Heavy-duty drywall anchors totally increase behind the surface of the drywall and may provide a lot stronger support for the bracket and shelf.
2. Use a Level and Measuring Tape
When putting in wood shelf brackets, you shouldn’t only caretotally measure the distance between the brackets with a tape measure, you must also ensure that they’re level. Through the use of your level along side a tape measure and straight edge, you possibly can make sure that your shelf brackets are completely straight and true. This is not going to only create a stronger base on your shelf, it is going to also make your cabinets appear to be they have been professionally installed.
3. Pre-Drill Screw Holes
Whether or not you’re putting in drywall anchors or using wood screws to screw right into a stud behind the wall, it’s best to always pre-drill screw holes. Pre-drilling the holes will make inserting your screws a lot simpler, and also enable you to avoid damaging wall surfaces. This will lead to rather a lot less time being spent on repairing partitions with drywall or wood putty. Pre-drilling the holes may also assist you to to insert the screws evenly and straight, and also require so much less elbow grease when turning the screws with a screwdriver.
4. Avoid Sagging Shelves
A quite simple shelf might be made with a chunk of plywood and some L-brackets. Nevertheless, when making this kind of shelf, you must at all times use the thickest piece of plywood available to you, and make sure that your L-brackets are properly spaced. When putting in L-brackets on a easy shelf, it’s best to be sure that the brackets are not any more than about 16 to 20 inches apart. Typically speaking, it’s best to try to install the brackets wherever a stud is present behind the drywall. This will result in a a lot stronger shelf and stop sagging within the middle. Sagging cabinets are dangerous if used to store heavy items.
5. Set up L-Bracket Before Hanging Shelf
In the event you’ll be utilizing L-brackets to assist a wooden shelf, it’s possible you’ll discover it easier to connect the L-brackets to the shelf piece before hanging it on the wall. Nevertheless, before hanging the shelf, you should all the time make sure that your screw holes are pre-drilled, and if you are using drywall anchors, that they’re installed. It is much easier to attach the shelf board on the bracket while you have got it on a desk or table, fairly than making an attempt to connect the shelf while standing on a ladder.
If you have any type of concerns concerning where and ways to make use of Modern Shelf Brackets, you could contact us at our own web site.